Faldblokke

Fall protection block designed for welding, grinding and other hot work. Reinforced fabric with Nomex® / Kevlar® fiber that can withstand sparks, welding fleas and other exposure to high heat. Exposed to arc to 8 cal (8 cal / cm2), for hot work such as. welding, grinding and work with cutting torches. Reinforced fabric with Nomex® / Kevlar® fiber *. Withstands sparks and welding fleas. Withstands arc up to 8 cal / cm2 Large hook with 57mm opening Tested for users ≤ 140kg

Falcon Edge provides protection for all work at height. Falcon Edge is designed for work where there is a risk of falling over an edge (edge radius ≥ 0.5 mm). The fall protection block can be used horizontally, vertically, mounted overhead and anchored to the foot level. Falcon Edge meets the most stringent safety standards, including EN360 Type B, VG11 (Rev 08). The block has a robust design with corrosion resistant internal components.

Miller's new series of Turbolite fall protection blocks are available in several lengths, with single or double ropes and with webbing or wire. The fall protection block is connected to the strap at the harness back anchorage and is tested for falls over the edge and is approved for users with a weight up to 140 kg in all fall factors. With webbing Spectra® tape - Good chemical, abrasion and cutting resistance Tested for users ≤ 140kg Edge tested: r≥0.5mm

Miller TurboLite Edge is completely edge tested and certified for workers who weigh up to 140 kg thanks to a very durable reinforced webbing. The lifeline is also approved for attachment at foot level (FF2) to protect workers who are at risk of falling over an edge but cannot choose a higher anchorage point (FF1 or FF0). It has a fast locking mechanism that reduces the distance for fall stops, which is especially important when the free fall height is short. Fall factor 0-1-2 140kg in all case factors Edge-approved Size: 2m Weight: 1.4kg

Miller mini block, scaffolding hook.

Very light and compact tape safety catch with latch hook.