Faldblokke

Kategorier (0)
3MRebel SRL Leading-Edge
3MRebel SRL Leading-Edge
Fall Arrest Protecta
Fall Arrest Protecta
Fall Arrest Sala Nan
Fall Arrest Sala Nan
Fall Arrest Scorpion
Fall Arrest Scorpion
Fall Arrest Welder
Fall Arrest Welder
Fall protection block designed for welding, grinding and other hot work. Reinforced fabric with Nomex® / Kevlar® fiber that can withstand sparks, welding fleas and other exposure to high heat. Exposed to arc to 8 cal (8 cal / cm2), for hot work such as. welding, grinding and work with cutting torches. Reinforced fabric with Nomex® / Kevlar® fiber *. Withstands sparks and welding fleas. Withstands arc up to 8 cal / cm2 Large hook with 57mm opening Tested for users ≤ 140kg
Fall Arrester Falcon
Fall Arrester Falcon
Falcon Edge provides protection for all work at height. Falcon Edge is designed for work where there is a risk of falling over an edge (edge radius ≥ 0.5 mm). The fall protection block can be used horizontally, vertically, mounted overhead and anchored to the foot level. Falcon Edge meets the most stringent safety standards, including EN360 Type B, VG11 (Rev 08). The block has a robust design with corrosion resistant internal components.
Fall Arrester ML Eva
Fall Arrester ML Eva
Fall Arrester Peanut
Fall Arrester Peanut
Fall Arrester Turbol
Fall Arrester Turbol
Fallskyddsblock Pean
Fallskyddsblock Pean
Miller SRL Turbolite
Miller SRL Turbolite
Miller's new series of Turbolite fall protection blocks are available in several lengths, with single or double ropes and with webbing or wire. The fall protection block is connected to the strap at the harness back anchorage and is tested for falls over the edge and is approved for users with a weight up to 140 kg in all fall factors. With webbing Spectra® tape - Good chemical, abrasion and cutting resistance Tested for users ≤ 140kg Edge tested: r≥0.5mm
Miller Turbolite Edge Fall Arrester
Miller Turbolite Edge Fall Arrester
Miller TurboLite Edge is completely edge tested and certified for workers who weigh up to 140 kg thanks to a very durable reinforced webbing. The lifeline is also approved for attachment at foot level (FF2) to protect workers who are at risk of falling over an edge but cannot choose a higher anchorage point (FF1 or FF0). It has a fast locking mechanism that reduces the distance for fall stops, which is especially important when the free fall height is short. Fall factor 0-1-2 140kg in all case factors Edge-approved Size: 2m Weight: 1.4kg
Miller Turbolite Fall Arrester
Miller Turbolite Fall Arrester
Miller mini block, scaffolding hook.
Turbolite Fall limit
Turbolite Fall limit
Very light and compact tape safety catch with latch hook.
Ingen resultater er fundet

:-(

It looks like the application is not working properly on this device. Please contact customer support with a screenshot of this message, so that we can help you.